Lamp for testing paint coatings VOLNA-AM-R

Purpose

- Polishing defects, grinding scratches;

- Coating holograms.

Specifications:

LED light sources in a metal case with protective glass.

Light sources:

6 ETG-C50 (1507) light modules;

Smooth change of glow intensity;

Color rendering index CRI ≥ 93.

Optical scheme:

LED light sources integrated into a parabolic reflector;
Lens viewing angle 24 º;
Protection from ultraviolet radiation;

Protective glass:

tempered sodium-calcium-silicate safety glass, 3 mm thick.

Case:

aluminum, powder coating.

Dimensions, not more than:

1600х250х100 mm

Operating temperature:

+5/+40 °С

Protection class not worse than:

IP54

Rated voltage:

176-264 V, 50/60 Hz

Power not less than:

80 W

Luminous flux, not less than:

4000 lm

Control

Illuminator control options:

- Individual version. Control of one illuminator. The regulators are located on the rear wall of the illuminator;

- Group version. Control of a group of illuminators from 1 to 5 pcs. The regulators are located on remote panels;

- General control. Control is carried out using the digital touch-panel of the operator "Volna-P". Support for up to 120 illuminators. In this case, each light has its own number and the operator can select a specific light and make adjustments.
See also