The product is intended for installation in a dedicated room to provide signal suppression in the phase and neutral wires of the socket network.
The product is a means of passive special protection of technical equipment from information leakage due to interference, i.e. conversion of radiation from technical equipment into an electrical signal in the power supply network that extends beyond the controlled area.
The product is connected to a single-phase two-wire network with a voltage of (220±10%) V and a frequency of 50 Hz.
TECHNICAL CHARACTERISTICS
Rated voltage of the protected power line, V 220
Number of phases of the protected power line 1
Maximum current value at which the product is allowed to operate, A 10
The value of inserted attenuation in the suppression band, not less than, dB 60
Overall dimensions, mm 333×110×85
Weight, not more than, kg 3
Continuous operation time - around the clock
Ambient air temperature, °C from 1 to 40
Relative air humidity, not more than 80% at 25 °C
Atmospheric pressure, mm Hg 630 ÷ 800
Mean time between failures, not less than, hours 10,000