The FSP-2P-20A filter is designed to protect electronic devices and computing equipment from information leakage through power supply circuits with a DC voltage of up to 30 V, as well as to protect them from pulse and high-frequency interference and increase noise immunity in the frequency range from 100 kHz to 1000 MHz. The filter is suitable for operation according to group 1.3 of GOST RV 20.39.304-98 in the operating temperature range from minus 10 degrees C to +50 degrees C.
TECHNICAL CHARACTERISTICS
FSP-2P-20A
1. Maximum operating current 20A
2. Maximum voltage on the filter 30V
Insertion loss of the signal in the frequency range, not less than
0.15 – 0.5 MHz 70 dB
0.5 — 600 MHz 80 dB
600 — 1000 MHz 70 dB
4. Voltage drop on the filter wires
at max. operating current, no more than 0.3 V
5. Suppression level of network impulse interference 43 V
6. Overall dimensions of the case, mm 160x82x85
7.Weight, kg, no more than 2.2
8.Electrical protection class according to GOST 12.2.007.0-75 1
When filters are connected in parallel, their corresponding characteristics are summed up.