Portable Cellular and WiFi Blocker Purpose The product is designed to block data transmission via cellular and WiFi channels, as well as to prevent the operation of the RVR controlled in this frequency range.
Features Small weight and dimensions allow you to move the product without difficulty. Long-term operation from the built-in battery significantly increases autonomy compared to other similar products. • The product can analyze the air and when an energy signal is detected, it turns on radiation, which increases the operating time of the product, and also extends the service life of the blocker, due to the reduction in operating time in radiation mode. The appearance of the product allows you to hide its use from external observation due to the absence of any unmasking signs. Control is carried out covertly using buttons on the transmitter or remotely via the Ethernet network, which allows you to combine several products into a network with one automated operator workstation. Power adjustment at the output of each letter is available from 0.5 W to the maximum value, which allows you to change the blocking zone. When connected to a 220 V network and powered on, the product starts working and simultaneously charges the built-in battery. The use of directional antennas increases the efficiency of signal blocking. There are several design options: a plastic case or a leather briefcase. Power Power is supplied from a built-in battery or from an alternating current network with a voltage of 220 V.
Package The product package includes a case, a transmitter with a power cable from a 220 V network, an Ethernet cable, a remote control, and operating documentation.
Technical specifications Device type wearable portable Range of suppressed frequencies 463…467.4 MHz; 746…821 MHz; 845…894 MHz; 925…960 MHz; 1805…1880 MHz; 2110…2170 MHz; 2400...2485 MHz; 2496...2700 MHz; 5150…5915 MHz. Operating time from 220 V network not less than 8 hours; from built-in battery not less than 4 hours Automatic operation mode with ether analyzer and switching on of radiation, reaction speed not more than 15 ms. Output power not less than 15.5 W. Transmitter weight not more than 13.5 kg not more than 5.5 kg Overall dimensions of transmitter (485 × 360 × 100) ± 10 mm. case (630 × 415 × 160) ± 10 mm.