It is designed to ensure the safety of police and special services units, to protect convoys, police and combat vehicles in the event of a threat of terrorist attacks against them using explosive devices with radio fuses.
The device reliably prevents the activation (blocking) of radio fuses from the coded radio signal transmitted by the command device in the frequency range of 20...2700 and 5600...5900 MHz.
The device is manufactured in a single housing and is placed inside the vehicle. Power is supplied from the vehicle's on-board network 12V or 24V. The device is controlled from the passenger compartment using a wired remote control. A set of antennas and an ALG5790/1 unit providing suppression in the frequency range of 5600...5900 MHz are placed on the roof of the vehicle on removable magnetic bases.
Thanks to the use of OptiJam technology, the emitted signal of the device has a high spectral density, which significantly increases the radius of suppression of radio fuses, while maintaining a safe level of radio emission for personnel.
The device has a built-in automatic diagnostic system that monitors the operability of all units and blocks. In the event of an emergency, sound and light alarm signals are output to the control panel indicating the faulty unit or block. If the antenna cables are broken or the antennas are damaged, they are switched off automatically to prevent failure of the corresponding amplifier units.
automotive broadband jammer of radio fuses use of OptiJam technology powered by a standard vehicle on-board network built-in digital diagnostic system with a malfunction alarm easy to mount and dismount on a vehicle, antennas on magnetic bases design meets military standards Total output power is measured at a load of 50 Ohm.