Liana-6000 M - portable automobile barrier, prevents unauthorized passage of passenger and cargo wheeled vehicles to restricted areas.
Features:
The portable barrier "Liana" is easy to transport and quickly installed on any road surface;
When not in use, the barrier transforms into a soft tube equipped with a carrying handle;
The width of the passage covered by the "Liana" barrier reaches from 6 to 12 meters, depending on the modification;
The stop of vehicles is ensured by hollow pointed spikes at least 60 mm high, reinforced with sealant on the fingers of the perforators;
The strips are made of plastic.
To increase the effectiveness of the impact, the barrier rods are made of a tubular profile with a cutting angle of 45 ° and when a car hits the barrier, they remain in the tire, thereby effectively bleeding air even with inflation;
The notches on the perforator rods prevent the rods from being pulled out of the tires;
In accordance with the Decree of the Government of the Russian Federation dated 15.05.2010 N333, the product "LIANA" is included in the list of special means used by the departmental security of the State Atomic Energy Corporation "Rosatom"
Portable automobile barriers "Liana" are designed to prevent unauthorized passage of passenger and cargo wheeled vehicles with pneumatic tires to restricted and other strategically important sites by mechanically damaging the tires of the vehicles. In accordance with the Decree of the Government of the Russian Federation dated 15.05.2010 N333, the "LIANA" product is included in the list of special means used by the departmental security of the State Atomic Energy Corporation "Rosatom". The operational portable barrier "LIANA" is easy to transport and quickly brought into combat position on almost any road surface. Quickly installed on the road surface. The width of the passage blocked by the "LIANA" barrier reaches from 6 to 12 m, depending on the modification. The height of the barrier spikes-perforators is 70±5 mm from the road surface. When not in use, the "LIANA" barrier is compactly transformed into a small case equipped with a carrying handle. To increase the effectiveness of the impact, the barrier spikes-perforators are made removable. The rods are made of a tubular profile, have a hinged base and are attached through a soft polymer cuff. Special notches on the spikes-perforators prevent the spikes from being pulled out of the tires when a car runs over the "LIANA", thereby effectively bleeding air from the tire, even with inflation. To enable stationary attachment to the road surface, the "LIANA" barrier is equipped with two metal pins with slings and metal carabiners. In order to increase the ease of transportation, the case of the "LIANA" products is equipped with a carrying handle, the case of the "LIANA-9000" product is also equipped with rollers.