The system is designed for remote operational control of object movement using a portable infrared volumetric sensor, a repeater with an actuator (hereinafter IA) and a base station (hereinafter BS).
The BS receives an alarm from the sensor via a radio channel when moving objects enter the working area of the sensor (or sensors).
An IA is installed to increase the communication range between the sensor and the BS. When the sensor is triggered, a relay in the IA can be switched on to activate external devices.
ADVANTAGES
1. Reliable operating system.
2. Small dimensions of the sensors.
3. Possibility of remote sensor design
4. The sensor operates for 30 days on one battery.
5. Works over long distances
6. Low cost of the sensor
7. Possibility of activating devices. Relay in the actuator.
TECHNICAL CHARACTERISTICS
Communication range between BS and type A sensor, not less than
500 m. (in open areas)
Communication range between BS and sensor with IS
1500 m. (in open areas)
Frequency range
800-900 MHz
Number of connected sensors
From 1 to 6
Sensor response distance
Up to 5 m. (see Fig. 2)
Sensor response range (depending on version)
Up to 1100 (see Fig. 2)
Sensor power supply, not less than
3 V
Sensor power supply
LIR2032(TIA A)/
ACCU(TYPE B)
Sensor operating time
about 1 month at 100 response times per day
Dimensions sensor
55x24x16 mm
Sensor weight no more than
60 gr.
BS power supply
3.7 V (built-in battery)
BS operating time not less than
18 hours
Operating temperature, °C
-20/+50
BS dimensions (without external antenna)
90x60x25 mm
BS weight not more than
120 g
IU power supply
3.7 V (built-in battery)
IU operating time not less than
24 hours
Operating temperature, °C
-20/+50
IU dimensions
125x50x40 mm
BS weight not more than
130 g
Sensor protection
IP65
BS protection
IP64
IU protection
IP64
BS indicator units
Color OLED display, vibration signal, headphone output, LED