Provides non-destructive capture of jacketed and unjacketed bullets suitable for weapon identification. It is made in the form of a steel cylindrical tube and is installed at an angle. The bullet catcher body consists of upper and lower sections connected by a loop group for easy extraction of spent bullets. The internal volume of the product is filled with a special aramid filler "PUM-120". The special aramid filler ("PUM-120") provides non-destructive capture of jacketed and unjacketed bullets. The design of the brake block provides rectilinear movement and smooth braking of the bullet, ensures the absence of bullet deformation and its subsequent accurate identification. Overall dimensions with a gas-dynamic compensator: length - no more than 1900 mm, height - no more than 1050 mm. Weight - no more than 60 kg.
When firing, the muzzle of the barrel is inserted into the opening in the front cover of the bullet catcher. The front cover of the bullet catcher serves to cut off the resulting gas emission. After the shot, the bullet is extracted from the filler. The gas-dynamic compensator serves to redistribute the powder gases, reducing the sound effect of the shot. The "TUPIK" bullet catcher is equipped with a removable cartridge case catcher. Bullet catcher "TUPIK-3000" Certified portable bullet and cartridge catcher for shooting long- and short-barreled weapons with jacketed and unjacketed bullets The "TUPIK-3000" bullet catcher ensures non-destructive catching of jacketed and unjacketed bullets, as well as small arms cartridges suitable for forensic examination. The "TUPIK-3000" delivery set includes a bullet catcher and a cartridge catcher. The bullet catcher is made in the form of a horizontally located thick-walled metal cylinder with stiffeners, fixed on two supports. The cylinder is divided into four sectors, each of which has a device for fixing the working environment (partitions). The design of the partitions allows for the placement of control screens between the sectors, designed to improve the convenience of locating the fired bullet. The internal volume of the bullet catcher is filled with a working medium made of aramid high-molecular fiber (HMWF). To simplify the extraction of spent bullets and replacement of the filler, the bullet catcher has four covers on the side surface; when all of them are opened, a single window is formed throughout the entire product. The covers are equipped with latches that automatically operate when closing, eliminating the spontaneous opening of the covers during a shot and contact with bullets, and two safety locks. To catch small arms cartridge cases, the TUPIK-3000 product kit includes a cartridge catcher installed on an independent support of adjustable height. Overall dimensions: length - no more than 2000 mm, height - no more than 1250 mm. Weight (in container) - no more than 120 kg.