The X-ray television inspection system SPECTRUM 6575DV with a tunnel size of 65 cm wide and 75 cm high has a lower conveyor location. It is designed to inspect baggage and small cargo. Features of the X-ray television inspection system RST SPECTRUM 6575DV:
Two-projection X-ray television system - two X-ray generators located in the upper and lower parts of the introscope provide inspection of baggage from different angles simultaneously. High detection characteristics - excellent resolution, high penetration on steel, a wide range of color combinations and gradations of gray levels, allow you to get a high-quality image of the inspected baggage. Automatic detection system for explosives and drugs - with the ability to configure automatic color highlighting of areas according to a given atomic number, allows you to automate the inspection process and reduce the likelihood of missing dangerous objects. Stability of software operation — the computer control system of the units, based on the Linux operating system, allows to completely eliminate software failures of the system in case of emergency power outage and other abnormal situations. Restoring the operability and starting the unit takes only a few minutes. Monitors and control keyboard — conveniently located in a lockable compartment. Reliability of units and components — allow to operate the units with minimal costs for a long period. Radiation safety — the level of X-ray radiation at a distance of 10 cm from any point of the unit surface is less than 1 μSv/h, which makes the operation of the units completely safe for personnel. Maximum set of software functions in the standard package. Standard functions (in the basic package) Smooth image scaling from 1× to 128× (ZOOM) 2x magnification by 9 image areas Automatic highlighting of suspicious and opaque image areas Moving the enlarged image on the screen Automatic detection of objects that may contain explosives and drugs, highlighting areas in the image by a specified equivalent atomic number Compensation for geometric distortions Automatic correction of the image brightness function (gamma correction) Negative image Image sharpening at the edges (contouring) Adjustment of image contrast (contrast optimization) Organic filtration Inorganic filtration Color and black and white images Return to the original image (reset graphic filters) Three levels of penetration (low, high, super deep) Image smoothing Image clarity Control real-time image TIP image projection program Self-diagnostic system Automatic image saving (archiving) Import of images in BMP, JPG, PNG formats Viewing the image library Baggage counter Both-directional scanning Multi-level access to RTU control Connection to a local Ethernet network via TCP/IP protocol Connection and transmission of data on RTU operation via the ONVIF protocol, in XML format, in accordance with the requirements of RF Government Resolution No. 969 dated 26.09.2016. Possibility of connecting a printer Data backup Control compartment The control compartment contains two high-resolution monitors and an introscope control keyboard, with intuitive operator control keys, each key is duplicated in the display's graphical interface, with pop-up tips. The control compartment is closed with special folding doors and locked.
Specifications: Main specification
Tunnel dimensions: Width, mm: 670 Height, mm: 770 Length, mm: 1930 Overall dimensions of the RTU: Width, mm: 1380 (1635*) Height, mm: 1645 Length, mm: 2560 Conveyor: Maximum distributed load on the conveyor belt, no more than kg: 200 Conveyor height from the floor, mm: 315 Conveyor speed, m/s: 0.23 Noise level, dB: < 52 Weight, no more than, kg: 1050 Inspection capabilities
Image gradation characteristics according to GOST R 57238—2016, number of gradations of gray field levels: 65,000 Quantity detectors in the system: 1728 Sensitivity (detection ability) for copper wire according to GOST R 57238—2016: In standard operating mode, mm: 0.12 (38 AWG) With additional image processing, mm: 0.1 (40 AWG) Penetration ability in steel Guaranteed, mm: 32 Maximum, mm: 35 Spatial image resolution according to GOST R 55249—2012 line pairs/mm 0.5 vertically; 0.5 horizontally X-ray generator Anode voltage, kV/Current, mA: 150/1.0 X-ray beam direction: Diagonally up, Diagonally down Cooling system: Convection, in a sealed oil tank Safety for photographic materials according to GOST R 55249-2012: up to ISO 1600 (33 DIN)
Detectors Shape of the detector system: L-shaped Type of X-ray detectors: Solid-state scintillation photodiodes Detectors of high and low energy X-rays Image processing system Control computer: Processor: Intel Core i7 Data storage device: Hard disk, SATA, 500 GB RAM: 8 GB Graphics adapter*: 1366 x 768, dual video output (color and black and white image) Monitor: High resolution, LCD (LED), 21’’ diagonal Operating system: Linux Maximum image archive size (number of scans): up to 200,000
Power supply Power line type: Single-phase three-wire (L-N-PE) Grounding system (ПУЭ): TN-S, TN-C-S Supply voltage, V: 220 ± 10% Supply frequency, Hz: 50 ± 1 Peak power consumption, kVA: 0.9 Average power consumption, kVA: 0.8
Operating, transportation and storage conditions Operation: Range of operating temperatures: from +5° to +45 °С Maximum air humidity up to 95%, without condensation Transportation: Temperature range: from -30° to +45 °С Storage: Temperature range: from 0° to +45 °С Maximum air humidity: up to 95%, non-condensing
Radiation safety
X-ray radiation level at a distance of 0.1 m from the surface of the RTU: <2.5 μSv/h