The FSP-1F-10A filter is certified by the FSTEC RF commission as an information security tool, certificate No. 1169 dated April 18, 2006, extended until April 18, 2018.
The FSP-1F-10A filter is designed to protect electronic devices and computing equipment from information leakage via grounding circuits and power supply circuits with a voltage of 220V 50 Hz or direct current up to 220V, as well as to protect them from pulse and high-frequency interference. It is made with 3 wires. The filtered working current is up to 10A. Provides protection against voltage surges in the network. It is manufactured according to the UHL4.2 category of GOST 15150-69 for embedding in consumer products or systems. Available in several modifications:
FSP-1F-10A – basic model, FSP-1F-10A-1.5 – with reduced reactive leakage current, FSP-1F-10A-Z – with additional protection against increased climatic and mechanical influences, FSP-1F-10A-U – complete with a distribution block for 4 Euro sockets with an extension cable L2 3 m long and a network cable L1 1.5 m long with a Euro plug, according to the diagram:
The lengths of L1 and L2 can be changed at the customer's request.
TECHNICAL CHARACTERISTICS
FSP-1F-10A FSP-1F-10A-1,5
1. Maximum operating current 10A 10A
Insertion loss of signal in the frequency range, not less than
0.15 – 0.6 MHz 60 dB 40 dB
0.6 — 4 MHz 75 dB 60 dB
4 — 1000 MHz 75 dB 75 dB
1000 — 2000 MHz 60 dB 60 dB
3. Voltage drop on filter wires
at max. operating current, no more than 0.3 V 0.3 V
4. Reactive leakage current to the case, no more than 40 mA 1.5 mA
5. Level of suppression of network impulse interference 390 V 390 V
6. Overall dimensions of the case, mm 164x70x56 164x70x56
Weight, kg, no more than 0.8 0.8
Electrical protection class according to GOST 12.2.007.0-75 1 1
When filters are connected in parallel, their corresponding characteristics are summed up. Designation when ordering: Network filter FSP-1F-10A (FSP-1F-10A-1.5; FSP-1F-10A-Z; FSP-1F-10A-U) KLUF.431149.006 TU.