Wired remote control DU21M version 524 is designed for remote wired control and management of information protection systems based on Sonata-IP3 versions 305, 307 and 308. The wired remote control is an element of the Sonata-AV3B information protection system, and is certified as an element of the system (FSTEC RF certificate 2533/1).
The appearance of the product is shown in Figure 1.
a) b) Figure 1. Wired remote control "Sonata-DU21M" version 524
Main functions of the Product: - remote wired switching on and off of the TSZI complex - prompt switching of settings ("profiles") of the SVAZ and protection from PEMIN - sound and light signaling of events: - indication of an abnormal state of the TSZI.
Using the Wired Remote Control allows for independent control of TSZI groups, such as a SVAZ group and a SAZ group (in this case, control is organized in the form of selecting a change in the SZI settings previously recorded in the memory of the controlled devices of the complex). The profile settings options are shown in Table 1.
Table 1. Purpose of system settings ("profiles"). Basic version.*
Setting number Purpose of the setting (conditional name) SVAZ devices SZI from PEMIN, 1 Devices operate with setting set 1 ("Quiet",). Devices are turned on ("On"). 2 Devices operate with setting set 2 ("Loud",). Devices are turned on ("On"). 3 Devices are turned off ("Off"). Devices are turned on ("On"). 4 Devices operate with setting set 1 ("Quiet",). The devices are switched off ("Off"). 5 The devices operate with the 2nd setting ("Loud"). The devices are switched off ("Off"). 6 The devices are switched off ("Off"). The devices are switched off ("Off").
*) May be changed by agreement with the Customer. The algorithm for switching the System settings using the wired remote control "Sonata-DU21M" ver. 524 is shown in Fig. 2.
a) b) Fig. 2. Algorithm for switching the System settings using the wired remote control "Sonata-DU21M" ver. 524 (a) - by the SVAZ settings switching key, b) - by the PEMIN SZI settings switching key.
Attention! When connecting the wired remote control to the power supply and control line, observe the polarity indicated on the bottom cover of the remote control (see Fig. 3).
Figure 3. Power and control input
Remote control installation options.
1. Desktop installation. The remote control can be placed horizontally on a table or any other suitable surface. For this purpose, the remote control can be equipped with anti-friction feet (at the Customer's request). 2. Wall installation. In this case, the remote control is fixed to a protective mounting box installed in the wall under hidden wiring. (Installation features and explanations in Fig. 4)
Center distance. Cable position. Decorative caps. The distance between the mounting holes of the remote control corresponds to the standard distance between the fasteners of the wall box (60 mm). To attach the remote control, you can use self-tapping screws from the wall box - 3x20 After connecting the power and control cable to the remote control connector, it is placed in the cavity of the wall box After securing the remote control in the wall box, decorative caps are installed on the heads of the screws Fig. 4