The detector is designed to detect trace amounts of explosives (HE) on the fingers of a person passing through a checkpoint, and to send, when HE is exposed, a light and sound signal to alert the checkpoint controller, while simultaneously issuing an "alarm" signal to the CPU of the SFZ.
The "CHUB" HE detector can be integrated into the ACS and installed in existing checkpoints.
Main characteristics The explosive detector is a threshold device that registers trace amounts of HE on a person's fingers; Allows you to detect trace amounts of HE based on TNT, NG, PETN, EGDN, RDX, HMX, tetryl and nitrocellulose powders, including mixed HE based on them; The detector provides the ability to transmit messages via the Ethernet interface to the automated workstation of the access control system (ACS) operator of the CPU SFZ or to a separate personal computer. The sensitivity of the vapor detector of the Detector is not less than 10-13 g / cm3 (based on the content of TNT vapors in the air); The average time of the explosives control procedure does not exceed 6 seconds; According to the application mode, the explosives detector belongs to the equipment of continuous long-term use; The detector is powered from an alternating current network with a voltage of 220 (+ 10%, -15%) V with a frequency of 50 Hz, the power consumption of the detector does not exceed 120 W; The explosives detector is protected against unauthorized access to controls and electronic devices; The detector is a repairable and restorable product; Composition: device for sampling and detecting explosive microparticles; control and data processing unit.